CWE-834 vulnerabilities

pypdf is a free and open-source pure-python PDF library. An attacker who uses a vulnerability present in versions prior to 6.10.2 can craft a PDF which leads to long runtimes. This requires loading a PDF with a large trailer `/Size` value in incremental mode. This has been fixed in pypdf 6.10.2. As a workaround, one may apply the changes from the patch manually.

pypdf is a free and open-source pure-python PDF library. An attacker who uses a vulnerability present in versions prior to 6.10.1 can craft a PDF which leads to long runtimes. This requires cross-reference streams with wrong large `/Size` values or object streams with wrong large `/N` values. This has been fixed in pypdf 6.10.1. As a workaround, one may apply the changes from the patch manually.

Python-Multipart is a streaming multipart parser for Python. Versions prior to 0.0.26 have a denial of service vulnerability when parsing crafted `multipart/form-data` requests with large preamble or epilogue sections. Upgrade to version 0.0.26 or later, which skips ahead to the next boundary candidate when processing leading CR/LF data and immediately discards epilogue data after the closing boundary.

Serialize JavaScript to a superset of JSON that includes regular expressions and functions. Prior to version 7.0.5, there is a Denial of Service (DoS) vulnerability caused by CPU exhaustion. When serializing a specially crafted "array-like" object (an object that inherits from Array.prototype but has a very large length property), the process enters an intensive loop that consumes 100% CPU and hangs indefinitely. This issue has been patched in version 7.0.5.

pypdf is a free and open-source pure-python PDF library. Prior to 6.7.1, an attacker who uses this vulnerability can craft a PDF which leads to long runtimes and large memory consumption. This requires parsing the /ToUnicode entry of a font with unusually large values, for example during text extraction. This vulnerability is fixed in 6.7.1.

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Validate payload length before processing block Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load() to be done before the block is processed. The check that the length of a block payload does not exceed the number of remaining bytes in the firwmware file buffer was being done near the end of the loop iteration. However, some code before that check used the length field without validating it.

In the Linux kernel, the following vulnerability has been resolved: ionic: use dev_consume_skb_any outside of napi If we're not in a NAPI softirq context, we need to be careful about how we call napi_consume_skb(), specifically we need to call it with budget==0 to signal to it that we're not in a safe context. This was found while running some configuration stress testing of traffic and a change queue config loop running, and this curious note popped out: [ 4371.402645] BUG: using smp_processor_id() in preemptible [00000000] code: ethtool/20545 [ 4371.402897] caller is napi_skb_cache_put+0x16/0x80 [ 4371.403120] CPU: 25 PID: 20545 Comm: ethtool Kdump: loaded Tainted: G OE 6.10.0-rc3-netnext+ #8 [ 4371.403302] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 01/23/2021 [ 4371.403460] Call Trace: [ 4371.403613] <TASK> [ 4371.403758] dump_stack_lvl+0x4f/0x70 [ 4371.403904] check_preemption_disabled+0xc1/0xe0 [ 4371.404051] napi_skb_cache_put+0x16/0x80 [ 4371.404199] ionic_tx_clean+0x18a/0x240 [ionic] [ 4371.404354] ionic_tx_cq_service+0xc4/0x200 [ionic] [ 4371.404505] ionic_tx_flush+0x15/0x70 [ionic] [ 4371.404653] ? ionic_lif_qcq_deinit.isra.23+0x5b/0x70 [ionic] [ 4371.404805] ionic_txrx_deinit+0x71/0x190 [ionic] [ 4371.404956] ionic_reconfigure_queues+0x5f5/0xff0 [ionic] [ 4371.405111] ionic_set_ringparam+0x2e8/0x3e0 [ionic] [ 4371.405265] ethnl_set_rings+0x1f1/0x300 [ 4371.405418] ethnl_default_set_doit+0xbb/0x160 [ 4371.405571] genl_family_rcv_msg_doit+0xff/0x130 [...] I found that ionic_tx_clean() calls napi_consume_skb() which calls napi_skb_cache_put(), but before that last call is the note /* Zero budget indicate non-NAPI context called us, like netpoll */ and DEBUG_NET_WARN_ON_ONCE(!in_softirq()); Those are pretty big hints that we're doing it wrong. We can pass a context hint down through the calls to let ionic_tx_clean() know what we're doing so it can call napi_consume_skb() correctly.

The IFrame widget in Liferay Portal 7.2.0 through 7.4.3.26, and older unsupported versions, and Liferay DXP 7.4 before update 27, 7.3 before update 6, 7.2 before fix pack 19, and older unsupported versions does not check the URL of the IFrame, which allows remote authenticated users to cause a denial-of-service (DoS) via a self referencing IFrame.

In Eclipse Parsson before versions 1.1.4 and 1.0.5, Parsing JSON from untrusted sources can lead malicious actors to exploit the fact that the built-in support for parsing numbers with large scale in Java has a number of edge cases where the input text of a number can lead to much larger processing time than one would expect. To mitigate the risk, parsson put in place a size limit for the numbers as well as their scale.

A maliciously-crafted image can cause excessive CPU consumption in decoding. A tiled image with a height of 0 and a very large width can cause excessive CPU consumption, despite the image size (width * height) appearing to be zero.

Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the "-check" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.

An issue was discovered in function get_gnu_verneed in rizinorg Rizin prior to 0.5.0 verneed_entry allows attackers to cause a denial of service via crafted elf file.

LISP dissector large loop in Wireshark 4.0.0 to 4.0.4 and 3.6.0 to 3.6.12 allows denial of service via packet injection or crafted capture file

Excessive loops in multiple dissectors in Wireshark 4.0.0 to 4.0.2 and 3.6.0 to 3.6.10 and allows denial of service via packet injection or crafted capture file

Attackers can create long chains of CAs that would lead to OctoRPKI exceeding its max iterations parameter. In consequence it would cause the program to crash, preventing it from finishing the validation and leading to a denial of service. Credits to Donika Mirdita and Haya Shulman - Fraunhofer SIT, ATHENE, who discovered and reported this vulnerability.

JOSE is "JSON Web Almost Everything" - JWA, JWS, JWE, JWT, JWK, JWKS with no dependencies using runtime's native crypto in Node.js, Browser, Cloudflare Workers, Electron, and Deno. The PBKDF2-based JWE key management algorithms expect a JOSE Header Parameter named `p2c` PBES2 Count, which determines how many PBKDF2 iterations must be executed in order to derive a CEK wrapping key. The purpose of this parameter is to intentionally slow down the key derivation function in order to make password brute-force and dictionary attacks more expensive. This makes the PBES2 algorithms unsuitable for situations where the JWE is coming from an untrusted source: an adversary can intentionally pick an extremely high PBES2 Count value, that will initiate a CPU-bound computation that may take an unreasonable amount of time to finish. Under certain conditions, it is possible to have the user's environment consume unreasonable amount of CPU time. The impact is limited only to users utilizing the JWE decryption APIs with symmetric secrets to decrypt JWEs from untrusted parties who do not limit the accepted JWE Key Management Algorithms (`alg` Header Parameter) using the `keyManagementAlgorithms` (or `algorithms` in v1.x) decryption option or through other means. The `v1.28.2`, `v2.0.6`, `v3.20.4`, and `v4.9.2` releases limit the maximum PBKDF2 iteration count to `10000` by default. It is possible to adjust this limit with a newly introduced `maxPBES2Count` decryption option. If users are unable to upgrade their required library version, they have two options depending on whether they expect to receive JWEs using any of the three PBKDF2-based JWE key management algorithms. They can use the `keyManagementAlgorithms` decryption option to disable accepting PBKDF2 altogether, or they can inspect the JOSE Header prior to using the decryption API and limit the PBKDF2 iteration count (`p2c` Header Parameter).

Large loops in multiple protocol dissectors in Wireshark 3.6.0 to 3.6.1 and 3.4.0 to 3.4.11 allow denial of service via packet injection or crafted capture file